PSW 30-108 Programmable Switching DC Power Supplies

Brief description

Models of PSW series are singleoutput, multi-range, and programmable switching DC power supplies.They can produce a maximum power of 1080W and a coverage of 15 models including 30V, 80V, 160V, 250V, and 800V rated voltage and 360W, 720W, and 1080W output power. Multi-range operation can flexibly and effectively set voltage and current. Users can arrange three PSW units in parallel the maximum to augment its application range by higher output current.(Max. power in parallel is 3.24KW.) Flexible multi-range operation and parallel combinations fully satisfy different power application requirements.PSW 250V/800V can meet high voltage application requirements for industries and sectors like the battery industry, automobile electronics, LED lighting, capacitive load products and power industry related manufacturers and R&D institutions. 250V and 800V models, same as that of other PSW models, have C.C/C.V priority mode, adjustable slew rate setting and output on/off delay function. The C.C priority mode can be used for DUTs with diode characteristics to prevent DUTs from being damaged by inrush current. The adjustable slew rate function of the PSW series allows users to set rise time (from low electric potential to high electric potential) and fall time (from high electric potential to low electric potential) for output voltage or output current. When voltage or current level is changed, the adjustable slew rate can be applied to verify DUT's characteristics. For instance, to simulate automobile battery slowly charging and discharging DUT's input terminal, voltage slew rate (0.1V/s) will be used to test incrementally decreasing Vmax to 0V and incrementally increasing 0V to Vmax. The output on/off delay function is to set output delay time. When many PSW units are being used, each unit's on/off delay time can be set independently that can be applied to multi sequence system applications and also can simulate multi sequence power output. The PSW power supply series has a bleeder control circuit which is in parallel with the output terminal. When power is off or load is disconnected, bleeder resistor will discharge the filter capacitor. In addition, bleeder resistor can be turned on and off through settings. When bleeder circuit is on, the discharge speed of filter capacitor will increase. The PSW series provides OVP and OCP. The preset protective value is 110% of the rated voltage and current. Output will be turned off immediately once the voltage and current is higher than the preset value.

Properties

  • Voltage Rating: 30V/80V/160V/250V/800V, Output Power Rating: 360W ~ 1080W
  • Constant Power Output for Multiple Range (V&I) Operation
  • CV/CC Priority; Particularly Suitable for the Battery and LED Industry
  • Adjustable Slew Rate
  • Series Operation: Up to 2 units (30V, 80V, 160V models only)
  • Parallel Operation: Up to 3 units
  • High Efficiency and High Power Density
  • 1/2, 1/3, 1/6 Rack Mount Size Design (EIA/JIS Standard) for 360W/720W/1080W
  • Standard Interface: LAN,USB,Analog Control Interface
  • Optional Interface: GPIB-USB Adaptor
  • LabView Driver

Types


PSW 30-36 (0 - 30V, 0 - 36A, 360W)
PSW 30-72 (0 - 30V, 0 - 72A, 720W)
PSW 30-108 (0 - 30V, 0 - 108A, 1080W)
PSW 80-13.5 (0 - 80V, 0 - 13.5A, 360W)
PSW 80-27 (0 - 80V, 0 - 27A, 720W)
PSW 80-40.5 (0 - 80V, 0 - 40.5A, 1080W)
PSW 160-7.2 (0 - 160V, 0 - 7.2A, 360W)
PSW 160-14.4 (0 - 160V, 0 - 14.4A, 720W)
PSW 160-21.6 (0 - 160V, 0 - 21.6A, 1080W)
PSW 250-4.5 (0 - 250V, 0 - 4.5A, 360W)
PSW 250-9 (0 - 250V, 0 - 9A, 720W)
PSW 250-13.5 (0 - 250V, 0 - 13.5A, 1080W)
PSW 800-1.44 (0 - 800V, 0 - 1.44A, 360W)
PSW 800-2.88 (0 - 800V, 0 - 2.88A, 720W)
PSW 800-4.32 (0 - 800V, 0 - 4.32A, 1080W)

Options

  • CD-ROM User manual and programming manual
  • Region dependent Power cord for Type I / II
  • Region dependent Power cord for Type III
  • GTL-240 USB Cable
  • 1042-SWLV0301 Output terminal cover for 30V/80V/160V models
  • 1042-SWHV0301 Output terminal cover for 250V/800V models
  • PSW-004 Basic Accessory Kit for 30V/80V/160V models
  • PSW-008 Basic Accessory Kit for 250V/800V models
  • GTL-123 Test leads: 1x red, 1x black, for 30V/80V/160V model
  • 39BT-50900401 High voltage output terminal for 250V/800V model
  • Optional Accessories
  • GET-001 Extended terminal for 30V/80V/160V models
  • GET-002 Extended terminal for 250V/800V models
  • PSW-001 Accessory kits for PSW-Series
  • PSW-002 Simple IDC Tool
  • PSW-003 Contact Removal Tool
  • PSW-005 Series operation cable for 2 units. (30V/80V/160V models moly)
  • PSW-006 Parallel operation cable for 2 units.
  • PSW-007 Parallel operation cable for 3 units.
  • GRA-410-J Rack mount adapter (JIS)
  • GRA-410-E Rack mount adapter (EIA)
  • GUG-001 GPIB to USB adapter
  • GTL-130 Test leads: 2 x red, 2 x black for 250V/800V models
  • GTL-240 USB Cable
  • 57RG-30B00201 Large filter (Type II/III)